Programmable Misting System
_x000D_
Programmable misting unit for terrariums and greenhouses
- _x000D_
- Easy to connect and install _x000D_
- Strong 2 BAR / 29 PSI / 200 KPA water pressure pump _x000D_
- Multi-directional brass spray nozzles for ultrafine misting (x2) _x000D_
- Pressure resistant Polyether tubing _x000D_
- Can be used with any water reservoir _x000D_
_x000D_
The Exo Terra Monsoon NANO is a programmable misting system suitable for all types of terrariums and greenhouses. The Monsoon NANO is ideally suited to supply your animals with spray water in a timely manner, and will also positively influence humidity levels through the extremely fine mist generated by the multi-directional brass spray nozzles. The spray’s duration and frequency are effortlessly customizable to cater to the specific requirements of your animals or plants. Frequent misting helps stimulate breeding behaviour, and is a necessity when housing live tropical plants such as Bromeliads, orchids, mosses, etc.
_x000D_
_x000D_
The system can be programmed to mist multiple times per 24-hour cycle, with spray durations ranging from 1 second up to 9 minutes. The Monsoon NANO can also be programmed to spray with intervals of once per day, or even up to once every 30 days.
_x000D_
_x000D_
The Monsoon NANO can be used with any water reservoir, meaning that you can adjust the water reservoir according to your needs. If little space is available, you can use a smaller reservoir, but if a Weekend or Holiday is planned, a bigger water reservoir ensures continuous operation for several days without the need for refilling.
_x000D_
_x000D_
The Exo Terra Monsoon NANO comes with 2 easy-to-install, multi-directional brass spray nozzles, making it ideal for 1 up to 2 terrariums. The Monsoon NANO can be extended to accommodate up to 4 nozzles. The mist produced by these specially designed brass nozzles is extremely fine, creating a fog-like effect in your terrarium or greenhouse.
_x000D_
_x000D_
Contents:
- _x000D_
- 1 x Monsoon NANO _x000D_
- 1 x Filter with polyether tubing _x000D_
- 1 x Polyether tubing 100 cm _x000D_
- 2 x Polyether tubing 50 cm _x000D_
- 1 x T-connector _x000D_
- 2 x Support suction cups _x000D_
- 2 x Multi-directional Brass Nozzles _x000D_
- 1 x set static cling clip _x000D_
- 1 x USB-A to USB-C power cable _x000D_
- 1 x Power adapter _x000D_
_x000D_
Additional accessories available to extend the system (sold separately):
_x000D_
HAPT2498 – Monsoon Y-connector
_x000D_
HAPT2500 – Monsoon Water Filter
_x000D_
HAPT2504 – Monsoon Polyether Tubing /1.8m / 6ft
_x000D_
HAPT2506 – Brass Nozzles – Multi-directional Brass Nozzles (2x)